3 / 10 page
3 of 10
RF3220
Rev A1 DS050822
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Package Drawing
Pin
Function
Description
Interface Schematic
1GND
Ground connection.
2RF IN
RF input pin. This pin is not internally DC-blocked. A DC blocking capacitor
suitable for the frequency of operation should be used.
3GND
Ground connection.
4GND
Ground connection.
5GND
Ground connection.
6GND
Ground connection.
7GND
Ground connection.
8RF OUT
Amplifier output pin. This pin is an open-collector output. It must be biased
to VCC through a choke or matching inductor. This pin is typically matched
to 50
Ω with a shunt bias/matching inductor and series blocking/matching
capacitor. Refer to application schematics.
See pin 2.
9GND
Ground connection.
10
GND
Ground connection.
11
BIAS
This pin is used to control the bias current. An external resistor may be
used to set the bias current for any VPD voltage. Allows for trade-offs
between IP3 versus noise figure and TMAX.
12
GND
Ground connection.
Pkg
Base
GND
Ground connection. Vias to ground required under the package base.
RF IN
RF OUT
To Bias
Circuit
V CC
Dimensions in mm.
Shaded lead is pin 1.
0.60
0.24
TYP
0.10
C AB
M
0.30
0.18
0.50
0.75
0.50
1.25
0.95
SQ.
PIN 1 ID
R.20
0.90
0.85
2 PLCS
0.05 C
0.70
0.65
0.05
0.00
12°
MAX
-C-
SEATING
PLANE
-B-
3.00
2 PLCS
0.10 C B
2.75 SQ.
2 PLCS
0.10 C A
2 PLCS
0.10 C B
-A-
2 PLCS
0.10 C A
3.00
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
