The Engineer’s Immediate RF Source

+1 (866) 558-2786 | sales@pasternack.com | pasternack.com

1

© 2025 Infinite Electronics, Inc. Pasternack is a registered trademark of Infinite Electronics, Inc.

RP-TNC Jack Bulkhead Mount for RG213, RG8,

RG215, RG213HV, LMR-400-FR, LMR-LW400,

TCOM-400, LMR-400-LLPX, PE-B400, PE-B405

PE48024

Configuration

• TNC Jack Reverse Polarity Connector

• 50 Ohms

• Straight Body Geometry

• Connector Interface Types: RG213, RG8, RG215, RG213HV,

LMR-400-FR, LMR-LW400, TCOM-400, LMR-400-LLPX, PE-

B400, PE-B405

• Bulkhead

Features

• Max. Operating Frequency 11 GHz

• Gold Plated Brass Contact

• Reverse Polarity

Applications

• General Purpose Test

• Rack and Panel Mount Applications

• Custom Cable Assemblies

Description

Pasternack's PE48024 RP TNC Jack Bulkhead Mount Connector for RG213, RG8, RG215, RG213HV, LMR-400-FR, LMR-LW400, TCOM-

400, LMR-400-LLPX, PE-B400 and PE-B405 Cable is part of our full line of RF components available for same-day shipping. The jack

reverse polarity configuration uses a jack connector body with an inner contact pin. Our TNC jack connector operates up to a maximum

frequency of 11 GHz. This TNC bulkhead connector allows designers to create external connections on their product enclosures, and can be

used in a variety of other rack mount and panel mount applications.

Our reverse polarity TNC jack bulkhead connector PE48024 datasheet specifications and drawing with dimensions are shown below in

this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their

signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly

configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom cable assemblies for you and

ship same-day.

Electrical Specifications

Description

Minimum

Typical

Maximum

Units

Frequency Range

DC

11

GHz

Insertion Loss

0.2

dB

Operating Voltage (AC)

500

Vrms

Dielectric Withstanding Voltage (AC)

1,500

Vrms

Impedance

50

Ohms

Mechanical Specifications

Size

Length

1.2 in [30.48 mm]

Width

0.69 in [17.53 mm]

Height

0.69 in [17.53 mm]

Mating Torque

15 in-lbs [[1.70 Nm]]