EV6908-S-01A – HIGH EFFICIENCY SYNCHRONOUS RECTIFICATION EV BOARD

NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third

party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not

assume any legal responsibility for any said applications.

EV6908-S-01A Rev. 1.0

www.MonolithicPower.com

4

1/26/2018

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2018 MPS. All Rights Reserved.

QUICK START GUIDE

1.

Connect the VSS and VD pin into the flyback circuit to replace the freewheel diode.

2.

Choose the supply voltage:

Connect HVC to VSS. The VDD will be supplied to 5V.

Connect HVC to a high voltage (level or switching). The VDD will be supplied to 9V.

3.

Turn the power supply on. The IC will start up and work as a freewheel diode automatically.