GENERAL

BATTERY

:

PP3 9V I.E.C. 6F22

BATTERY LIFE (INTERMITTENT USE)

:

GREATER THAN 200 HOURS (ALKALINE)

WEIGHT

:

155 gm

DIMENSIONS

:

130 X 70 X 33 mm

Probes

All probes are manufactured using:



Type ‘T’ Thermocouple

: ½ Class I

(±0.25°C ±0.15%)



Two stage moulding technique. Firstly the probes are encased in tough nylon, then

a thermoplastic over moulding is applied. This gives an extremely robust and

durable construction.



Polypropylene Handles: Polypropylene is an extremely tough and durable material,

commonly used for milk crates; it has good low temperature performance and a

relatively high melt temperature. It performs exceptionally well under chemical

attack



Polypropylene Cable:



Polyurethane cables are used in place of the standard PVC for the following

reasons :-



Greater retractability



Enhanced memory of its curl



Non–Toxic



Greater mechanical strength for durability



12 X 0.2mm wires used internally for greater strength.



PTFE inner insulation for strength and retractability.

TS07 SPRUNG SHIELD SURFACE PROBE

The probe is designed for the measurement of surface temperatures with wide temperature

range.

Construction

Surface probe with sprung tip with thermocouple sensor attached with draught shield: Stainless

Steel 316 (Food Grade). 2M curly polyurethane cable with moulded connector.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: -30 TO 50 °C



TIME RESPONSE

(96% of valueon clean metal)

: 3.0 Secs



MEASUREMENT RANGE

: -50 TO 400 °C

TM03 TYPE ‘T’ GENERAL PURPOS/IMMERSION PROBE

The probe is truly general purpose and may be used for gas, liquid or applications with difficult

access.

Construction

Minerally Insulated Probe 3.0 mm Diameter by 100mm Long: Stainless Steel 316 (Food Grade).

2M curly polyurethane cable with moulded connector. Complete waterproof assembly.



WIDE AMBIENT TEMPERATURE SPECIFICATION

: -30 TO 50 °C