Physical specifications

Note: all dimensions in mm

WARNINGS

•

Any external power supply used with Raspberry Pi Compute Module 4 shall comply with relevant

regulations and standards applicable in the country of intended use.

•

This product should be operated in a well-ventilated environment, and if used inside a case, the case

should not be covered.

•

Whilst in use, this product should be placed on a stable, flat, non-conductive surface, and should not be

contacted by conductive items.

•

The connection of incompatible devices to Compute Module 4 may affect compliance, result in damage

to the unit, and invalidate the warranty.

•

All peripherals used with this product should comply with relevant standards for the country of use

and be marked accordingly to ensure that safety and performance requirements are met. These

articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the

Compute Module.

•

The cables and connectors of all peripherals used with this product must have adequate insulation so

that relevant safety requirements are met.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:

•

Do not expose to water or moisture, or place on a conductive surface whilst in operation.

•

Do not expose to heat from any source; Raspberry Pi Compute Module 4 is designed for reliable operation

at normal ambient temperatures.

•

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board

and connectors.

•

Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise

the risk of electrostatic discharge damage.

4

Raspberry Pi Compute Module 4