| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
GS-D500A bảng dữ liệu(PDF) 9 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
GS-D500A bảng dữ liệu(HTML) 9 Page - STMicroelectronics |
|
9 / 10 page ![]() 9/10 A8 - OUTPUT OVERLOAD AND SHORT CIRCUIT PROTECTION To prevent permanent damage to the GS-D500A, three protections have been implemented against overload and short circuits between: - output to output - output to ground When one of these adverse conditions occurs, the driver of the output H-bridges is disabled for about 500ms and the condition is signaled by the FAULT signal. A9 - FAULT SIGNAL The FAULT signal is available at pin J3-13. When a fault is present, pin 13 goes low versus pins 6,7. Whenever the FAULT signal is activated, the led provided in the front edge of the module is switched ON. The FAULT signal is active (low) when: - the supply voltage is lower than 12V - the heatsink temperature is higher than 90 °C - an output overload is present - a disable is active. Figure 9 - FAULT signal output circuit GS-D500A |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |