SPC584G80C3 datasheet(95/139 Pages) STMICROELECTRONICS

95 / 139 page

DS11758 Rev 6

95/139

SPC584Gx, SPC58EGx, SPC58NGx

Electrical characteristics

106

4.17.3.1

MII receive signal timing (RXD[3:0], RX_DV, RX_ER, and RX_CLK)

The receiver functions correctly up to a RX_CLK maximum frequency of 25 MHz +1%.

There is no minimum frequency requirement. The system clock frequency must be at least

equal to or greater than the RX_CLK frequency.

Note:

In the following table, all timing specifications are referenced from RX_CLK = 1.4 V to the

valid input levels, 0.8 V and 2.0 V.

Figure 33. MII receive signal timing diagram

4.17.3.2

MII transmit signal timing (TXD[3:0], TX_EN, TX_ER, TX_CLK)

The transmitter functions correctly up to a TX_CLK maximum frequency of 25 MHz +1%.

There is no minimum frequency requirement. The system clock frequency must be at least

equal to or greater than the TX_CLK frequency.

The transmit outputs (TXD[3:0], TX_EN, TX_ER) can be programmed to transition from

either the rising or falling edge of TX_CLK, and the timing is the same in either case. This

option allows the use of non-compliant MII PHYs.

Refer to the SPC584Gx, SPC58EGx, SPC58NGx 32-bit Power Architecture microcontroller

reference manual’s Ethernet chapter for details of this option and how to enable it.

Note:

In the following table, all timing specifications are referenced from TX_CLK = 1.4 V to the

valid output levels, 0.8 V and 2.0 V.

Table 50. MII receive signal timing

Symbol

Characteristic

Value

Unit

Min

Max

CC D RXD[3:0], RX_DV, RX_ER to RX_CLK setup

—

CC D RX_CLK to RXD[3:0], RX_DV, RX_ER hold

—

CC D RX_CLK pulse width high

35%

65%

RX_CLK period

CC D RX_CLK pulse width low

35%

65%

RX_CLK period

RX_CLK (input)

RXD[3:0] (inputs)

RX_DV

RX_ER

SPC584G80C3 bảng dữ liệu(PDF) 95 Page - STMicroelectronics

SPC584G80C3 bảng dữ liệu(HTML) 95 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL