| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PAC1933T-I/JQ. bảng dữ liệu(PDF) 44 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PAC1933T-I/JQ. bảng dữ liệu(HTML) 44 Page - Microchip Technology |
|
44 / 62 page ![]() PAC1932/3/4 DS20005850C-page 44 2017-2018 Microchip Technology Inc. REGISTER 6-12: REFRESH_G COMMAND (ADDRESS 1EH) SEND SEND SEND SEND SEND SEND SEND SEND No Data in this command, Send Byte only bit 7 bit 0 Legend: R = Readable bit W = Writeable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 7-0 This command is a SEND Byte, does not contain any data. It is exactly like the REFRESH command but is intended for use with the General Call command. When it is sent to the device, the REFRESH command is executed and the readable accumulator data, readable accumulator count, VBUS, and VSENSE measurements are all refreshed and the internal accumulators values or accumulator count are reset, exactly like the REFRESH command. The master can read the updated data 1 ms after the REFRESH_G command is sent, and anytime after than up until the next REFRESH, REFRESH_G, or REFRESH_V command is sent. REGISTER 6-13: REFRESH_V COMMAND (ADDRESS 1FH) SEND SEND SEND SEND SEND SEND SEND SEND No Data in this command, Send Byte only bit 7 bit 0 Legend: R = Readable bit W = Writeable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 7-0 This command is a SEND Byte, does not contain any data. When it is sent to the device, the REFRESH_V command is executed. It is similar to the REFRESH command except the accumulators and accumulator count are not reset. The readable accumulator data, readable accumulator count, VBUS, and VSENSE measurements are all refreshed without affecting the internal accumulators values or accumulator count. The master can read the updated data 1 ms after the REFRESH_V command is sent, and anytime after than up until the next REFRESH, REFRESH_G, or REFRESH_V command is sent. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |