TDA7563ASMTR datasheet(19/35 Pages) STMICROELECTRONICS

tên linh kiện	TDA7563ASMTR

Giải thích chi tiết về linh kiện	4 x 50 W power amplifier with high efficiency and built-in I2C diagnostic

PDF	35 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

19 / 35 page

DocID14407 Rev 5

19/35

TDA7563A

Output DC offset detection

4.3

Faults availability

All the results coming from I2C bus, by read operations, are the consequence of

measurements inside a defined period of time. If the fault is stable throughout the whole

period, it will be sent out.

To guarantee always resident functions, every kind of diagnostic cycles (Turn on,

Permanent, Offset) will be reactivated after any I2C reading operation. So, when the micro

reads the I2C, a new cycle will be able to start, but the read data will come from the previous

diag. cycle (i.e. The device is in Turn On state, with a short to Gnd, then the short is

removed and micro reads I2C. The short to Gnd is still present in bytes, because it is the

result of the previous cycle. If another I2C reading operation occurs, the bytes do not show

the short). In general to observe a change in Diagnostic bytes, two I2C reading operations

are necessary.

TDA7563ASMTR bảng dữ liệu(PDF) 19 Page - STMicroelectronics