ISO7640FM, ISO7641FM

SLLSE89G – SEPTEMBER 2011 – REVISED JANUARY 2015

www.ti.com

6.19 Switching Characteristics: VCC1 and VCC2 at 2.7 V

VCC1 and VCC2 at 2.7 V (over recommended operating conditions unless otherwise noted)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

tPLH, tPHL

Propagation delay time

5

8

16

See Figure 9

PWD(1)

Pulse width distortion |tPHL – tPLH|

2.5

Same-direction Channels

4

ns

tsk(o)

(2)

Channel-to-channel output skew time

Opposite-direction Channels

5

tsk(pp)

(3)

Part-to-part skew time

8

tr

Output signal rise time

2.3

See Figure 9

ns

tf

Output signal fall time

1.8

Disable Propagation Delay, high-to-high

tPHZ

8

18

impedance output

Disable Propagation Delay, low-to-high

tPLZ

8

18

impedance output

See Figure 10

ns

Enable Propagation Delay, high impedance-to-

tPZH

7

18

high output

Enable Propagation Delay, high impedance-to-

tPZL

7

18

low output

Fail-safe output delay time from input data or

tfs

See Figure 11

8.5

μs

power loss

(1)

Also known as Pulse Skew.

(2)

tsk(o) is the skew between outputs of a single device with all driving inputs connected together and the outputs switching in the same

direction while driving identical loads.

(3)

tsk(pp) is the magnitude of the difference in propagation delay times between any terminals of different devices switching in the same

direction while operating at identical supply voltages, temperature, input signals and loads.

16

Submit Documentation Feedback

Copyright © 2011–2015, Texas Instruments Incorporated

Product Folder Links: ISO7640FM ISO7641FM