Mounting options Pedestals and Pedestal accessories

nVent.com/HOFFMAN

SUBJECT TO CHANGE WITHOUT NOTICE

HMi (HuMan-MacHine interface)

5

Spec-00485 L

swivel tilt

The use of a combination swivel and tilt mechanism allows a

machine operator to rotate and also tilt an HMI enclosure for

optimum viewing and safe operation. The Swivel Tilt is designed

for use between the bottom of an HMI enclosure and a pedestal

(enclosure reinforcement may be required).

do not use the swivel tilt between an overhead support and an

enclosure.

The swivel feature allows maximum rotation of 350 degrees.

Integral stops are provided at 30-degree increments between 60

degrees and 180 degrees of rotation. Swivel can be locked in any

position. Tilt feature allows forward and backward movement up

to 30 degrees from horizontal. Tilt lock has a large release knob

that allows quick incremental adjustment. Top and bottom flanges

allow easy installation on pedestals. A large center opening

accommodates control cables that have attached plugs. Swivel Tilt

is cast aluminum with an anodized finish. Mounting hardware and

gaskets are furnished.

Bulletin: p1

Catalog

Number

AxBxC mm/in.

Maximum

Enclosure

Size A x B x C

mm/in.

Maximum Load

Including Enclosure

(kg)

Maximum Load

Including Enclosure

(lb.)

AST44

148 x 102 x 102

5.81 x 4.00

x 4.00

610 x 610 x 406

24.00 x 24.00 x

16.00

34.0

75

AST88

203 x 203 x 203

8.00 x 8.00

x 8.00

838 x 610 x 610

33.0 x 24.00 x 24.00

68.0

150

The loads listed assume that the additional load is centered on the front or back of the enclosure. Please

contact Hoffman for specific application information.

swivel

A swivel mechanism can be used to provide a machine operator a

way to easily rotate an operator interface enclosure to a convenient

operating position. Maximum rotation is 350 degrees. The low-

profile swivel has a large center opening in addition to a large,

wobble-free bearing surface. Swivel mechanism can be locked in

any position. The swivel mechanism is designed for use between the

bottom of an operator interface enclosure and a pedestal.

do not use the swivel between an overhead support and an

enclosure.

The Swivel is cast aluminum with an anodized finish. Mounting

hardware and gaskets are furnished.

Integral stops are provided at 30-degree increments between 60

degrees and 180 degrees of rotation on catalog number ASWV88

only.

Bulletin: p1

Catalog

Number

AxBxC mm/in.

Maximum

Enclosure

Size A x B x C

mm/in.

Maximum Load

Including Enclosure

(kg)

Maximum Load

Including Enclosure

(lb.)

ASWV44

27 x 102 x 102

1.06 x 4.00

x 4.00

610 x 610 x 406

24.00 x 24.00 x

16.00

45.4

100

ASWV88

33 x 203 x 203

1.28 x 8.00

x 8.00

838 x 610 x 610

33.00 x 24.00 x

24.00

90.7

200

The loads listed assume that the additional load is centered on the front or back of the enclosure. Please

contact Hoffman for specific application information.