2

Electrical specifications

2.1

Absolute maximum ratings

Stressing the device above the rating listed in the Table 2. Absolute maximum ratings may damage to the device

permanently. These are stress ratings only. Operations of the device under conditions above those stated in this

specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

Table 2. Absolute maximum ratings

Symbol

Parameter

Value

Unit

VS

DC supply voltage

-0.3 to 28

V

VS

Single pulse / tmax < 400 ms “transient load

dump”

40

V

IS

Input current

internally limited

VO

DC output voltage

-0.3 to 6

V

IO

DC output current

internally limited

VWI

Watchdog input voltage

-0.3 to VO + 0.3

V

VCW

Watchdog delay voltage

- 0.3 to VO + 0.3

V

Vrst

Reset output voltage

-0.3 to VO + 0.3

V

Irst

Reset output current

Internally limited

Vtw

Thermal warning output voltage

-0.3 to VO + 0.3

V

Itw

Thermal warning output current

Internally limited

Vsh_ctrl

“Short current” control voltage

-0.3 to 3.6

V

VEN

Enable input

-0.3 to VS + 0.3

V

VSELx

Selectors input voltage

-0.3 to VS + 0.3

V

VESD HBM

ESD HBM voltage level (HBM-MIL STD 883C)

±2

kV

VESD CDM

ESD CDM voltage level (CDM AEC-Q100-011)

±500

V

ESD CDM voltage level on corner pins (CDM

AEC-Q100-011)

±750

V

L99VR02J

Electrical specifications

DS14076 - Rev 1

page 5/38