Product Information • SCX-PCIE • Secondary Backplane Controller

Features

Feature Summary

General

<

Bus Coupler for two CompactPCI® Serial backplanes (system expansion)

<

Mixed function mezzanine side card for EKF CompactPCI® Serial CPU boards

<

Form factor single size Eurocard (board dimensions 100x160mm

2)

<

PICMG® CompactPCI® Serial (CPCI-S.0) system slot card

<

Based on new mezzanine connectors HSE1/HSE2 (8 x PCIe® Gen3)

<

Suitable e.g. for use with CPU cards SC4-CONCERTO or SC5-FESTIVAL

<

8HP assembly together with CPU card

<

24-lanes PCI® Express Gen3 switch

<

Supports secondary CompactPCI® Serial backplane

<

Provides Gigabit Ethernet front panel I/O (3 x RJ45)

<

Provides USB 3.0 front panel I/O (3 x Type A)

<

Provides mass storage capability (1 x M.2 NVMe/SATA, 1 x mSATA)

Backplane Connectors

<

CompactPCI® Serial backplane connectors P1, P2, P4, P5, system board pin assignment

<

PCI® Express support for all eight peripheral slots of a secondary CompactPCI® Serial backplane

<

Four links Gen3 x4 (available on peripheral slots 1, 2, 3, 5)

<

Four links Gen2 x1 (available on peripheral slots 4, 6, 7, 8)

<

Can be used with any standard CompactPCI® Serial backplane (system slot left aligned)

PCI Express® Switching

<

24-lane 6-port PCI Express® Gen3 packet switch PEX 8724

<

Upstream 1 x4 link wired to the HSE1 mezzanine connector (CPU card PCH)

<

Downstream 4 x4 links to the CompactPCI® Serial backplane

<

Downstream 1 x4 link to the NVMe SSD M.2 socket

<

6-lane 6-port PCI Express® Gen2 packet switch PI7C9X2G606PR

<

Upstream 1 x1 link wired to the HSE2 mezzanine connector (CPU card PCH)

<

Downstream 4 x1 links to the CompactPCI® Serial backplane

<

6-lane 6-port PCI Express® Gen2 packet switch PI7C9X2G606PR

<

Upstream 1 x1 link wired to the HSE2 mezzanine connector (CPU card PCH)

<

Downstream 3 x1 links to the I210 Gigabit Ethernet NICs

<

Downstream 1 x1 link to the TUSB7320 USB controller

Front Panel I/O

<

3 x RJ45 Gigabit Ethernet jacks, three individual on-board I210-IT controllers

<

1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate

<

3 x USB 3.0 (3.1 Gen1) Type A receptacles

<

Two USB ports via on-Board USB controller, one USB port derived from HSE1 mezzanine connector

© EKF

-4-

ekf.com