AFE031 datasheet(7/59 Pages) TI2

7 / 59 page

AFE031

www.ti.com

SBOS531E – AUGUST 2010 – REVISED JUNE 2019

Product Folder Links: AFE031

Submit Documentation Feedback

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied.

(2)

Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.4 V beyond the supply rails should

be current limited to 10 mA or less. Output terminals are diode-clamped to the power-supply rails. Output signals that can swing more

than 0.4 V beyond the supply rails should be current limited to 10 mA or less.

(3)

Short-circuit to ground.

(4)

The AFE031 automatically goes into shutdown at junction temperatures that exceed 150°C.

8 Specifications

8.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

Voltage

Supply voltage, PA_VS

Signal input terminals

Pins 18,19(2)

PA_GND – 0.4

PA_VS + 0.4

Pins 13, 15, 16, 21, 23-25, 28, 32, 34,

35, 38, 39, 46(2)

AGND – 0.4

AVDD + 0.4

Pins 3, 4, 6, 7, 8(2)

DGND – 0.4

DVDD + 0.4

Voltage limit

Pin 27

–10

Supply voltage

AVDD

5.5

DVDD

5.5

Current

Signal input terminals

Pins 18,19(2)

–10

Pins 13, 15, 16, 21, 23-25, 28, 32, 34,

35, 38, 39, 46(2)

–10

Pins 3, 4, 6, 7, 8(2)

–10

Signal output terminals

Pins 5, 9, 14, 17, 20, 22, 26, 31, 33,

36, 37, 47, 48(2)

Continuous

Output short circuit (PA)

Pins 42, 43

Continuous

Current limit

Pin 10(2)(3)(4)

–10

Temperature

Operating, TA

(4)

–40

150

°C

Junction, TJ

150

Storage, Tstg

–55

125

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

8.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

3000

Charged-device model (CDM), per JEDEC specification JESD22-

C101(2)

500

AFE031 bảng dữ liệu(PDF) 7 Page - Texas Instruments

AFE031 bảng dữ liệu(HTML) 7 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59

bảng dữ liệu tải về

Link URL