4/4

DO-201AD (Plastic)

PACKAGE MECHANICAL DATA

BA

E

E

ØD

ØD

ØC

B

note 2

note 1

note 1

REF.

DIMENSIONS

NOTES

Millimeters

Inches

Min.

Max.

Min.

Max.

A

9.50

0.374 1 - The lead diameter

∅ D is not controlled over zone E

2 - The minimum axial lengh within which the device may be

placed with its leads bent at right angles is 0.59"(15 mm)

B

25.40

1.000

∅ C

5.30

0.209

∅ D

1.30

0.051

E

1.25

0.049

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsIbility for the consequences

of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted

by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to

change without notice. This publication supersedes and replaces all information previously supplied.

STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval

of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics

© 1998 STMicroelectronics - Printed in Italy - All rights reserved.

STMicroelectronics GROUP OF COMPANIES

Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco -

The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.

Marking : type number, white band indicates cathode

Cooling method : by convection (method A)

Weight : 1.166g

BYT13-600

→ 1000