ESP32-CAM Development Board

SKU:DFR0602

INTRODUCTION

ESP32-CAM is a low-cost ESP32-based development board with onboard camera, small in

size. It is an ideal solution for IoT application, prototypes constructions and DIY projects.

The board integrates WiFi, traditional Bluetooth and low power BLE , with 2 high-

performance 32-bit LX6 CPUs. It adopts 7-stage pipeline architecture, on-chip sensor,

Hall sensor, temperature sensor and so on, and its main frequency adjustment ranges

from 80MHz to 240MHz.

Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as

a master mode to build an independent network controller, or as a slave to other host

MCUs to add networking capabilities to existing devices