Gravity: 12-Bit I2C DAC Module

SKU: DFR0552

 

 

Introduction

DFRobot Gravity 12-Bit I2C DAC is a small and easy-to-use 12-bit digital-to-analog converter with

EEPROM. It can accurately convert the digital value to corresponding analog voltage signal, which is

useful in may creative projects and automatic control systems. Although an analog voltage signal

can be generated by PWM with traditional controllers such as Arduino and Raspberry Pi, such signal

is ROUGH and NOT ACCURATE. To obtain a steady and nice analog voltage signal, the DAC is the

best candidate. In addition to be applied in automatic control systems, the DAC module can be use

to serve as a function generator to generate sine wave, triangular wave and even arbitrary waveform

(we provide a library to generate low frequency sin and triangular wave with just a few parameters).

The module employs a 12-bit DAC MCP4725. It requires no external reference voltage (DAC

reference is driven from VCC directly), supports 3.3V~5V wide input voltage and has a I2C address

selection switch (two address 0x60 and 0x61 are available, which support maximum two modules in

cascade). The EEPROM can retain the DAC input while power-off and resume the DAC output upon

power-on.