công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

Preview PDF HTML

STMPE1601 bảng dữ liệu(PDF) 22 Page - STMicroelectronics

tên linh kiện STMPE1601
Giải thích chi tiết về linh kiện  16-bit enhanced port expander with keypad and PWM controller Xpander Logic
PDF  58 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  STMICROELECTRONICS [STMicroelectronics]
Trang chủ  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

STMPE1601 bảng dữ liệu(HTML) 22 Page - STMicroelectronics

Back Button STMPE1601 Datasheet HTML 18Page - STMicroelectronics STMPE1601 Datasheet HTML 19Page - STMicroelectronics STMPE1601 Datasheet HTML 20Page - STMicroelectronics STMPE1601 Datasheet HTML 21Page - STMicroelectronics STMPE1601 Datasheet HTML 22Page - STMicroelectronics STMPE1601 Datasheet HTML 23Page - STMicroelectronics STMPE1601 Datasheet HTML 24Page - STMicroelectronics STMPE1601 Datasheet HTML 25Page - STMicroelectronics STMPE1601 Datasheet HTML 26Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 22 / 58 page
background image
Clocking system
STMPE1601
22/58
8.2
Power mode programming sequence
To put the device in sleep mode, the following needs to be done by the host:
–
Write a '1' to bit 4 of the SYS_CTRL register.
To wake up the device, the host is required to:
–
Assert a wakeup routine on the I2C bus by sending the Start bit, followed by the
device address and the Write bit. Subsequently, proceed with sending the Base
Register address and continue with a normal I2C transaction. The device wakes
up upon receiving the correct device address and in Write direction. In other
words, the procedure of waking up the device is performed by just sending an I2C
transaction to the device. This procedure can be extended to wake up the device
that is in hibernate mode.
To do a soft reset to the device, the host needs to do the following:
–
Write a '1' to bit 7 of the SYS_CTRL register. This bit is automatically cleared upon
reset.
To go into Hibernate mode, the following needs to be done by the host:
–
Set the Disable_32K bit to '1'
To come out of the Hibernate mode, the following needs to be done by the host:
–
Assert a system reset
–
or put a wakeup on the I2C



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com