www.element14.com

www.farnell.com

www.newark.com

www.cpc.co.uk

www.mcmelectronics.com

Page <1>

V1.0

27/08/14

RJ45 Modular Crimp Tool

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted

for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any

error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any

assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the

Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.

DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2012.

Part Number Table

Description

Part Number

RJ45 Crimp Tool (Modular)

D03021

Description:

A high quality ratchet crimp tool designed to crimp Molex RJ45 crimps. The tool has an all steel, ratchet design which generates

the correct pressure needed to create a perfect crimp. The tool measures 220mm in length and is manufactured from high

tensile, hardened mid-carbon steel with soft grips.

• For use with RJ45 connectors without boot and strain relief buit-in