PAX-1SLASH8 datasheet(3/32 Pages) REDLION

3 / 32 page

general meTer speCifiCaTiOns

1. DISPLAY: 6 digit, 0.56" (14.2 mm) red sunlight readable or standard green

LED

2. POWER:

AC Versions:

AC Power: 85 to 250 VAC, 50/60 Hz, 18 VA

Isolation: 2300 Vrms for 1 min. to all inputs and outputs. (300 V working)

DC Versions:

DC Power: 11 to 36 VDC, 14 W

(derate operating temperature to 40° C if operating <15 VDC and three

option cards are installed)

AC Power: 24 VAC, ± 10%, 50/60 Hz, 15 VA

Isolation: 500 Vrms for 1 min. to all inputs and outputs (50 V working).

3. SENSOR POWER: 12 VDC, ±10%, 100 mA max. Short circuit protected

4. KEYPAD: 3 programmable function keys, 5 keys total

5. USER INPUTS: Three programmable user inputs

Max. Continuous Input: 30 VDC

Isolation To Sensor Input Commons: Not isolated

Logic State: Jumper selectable for sink/source logic

Response Time: 6 msec. typical; function dependent. Certain resets, stores

and inhibits respond within 25 µsec if an edge occurs with the associated

counter or within 6 msec if no count edge occurs with the associated

counter. These functions include , , , ,



, , and . Once activated, all functions are latched for

50 msec min. to 100 msec max. After that period, another edge/level may

be recognized.

6. OUTPUT:

Response Time: 25 µsec.; add 6 msec (typical) if a relay card is installed

Timed Output Accuracy: Counter = ± 0.01% + 10 msec.

Rate = ± 0.01% + 20 msec.

7. MEMORY: Nonvolatile memory retains all programmable parameters and

display values when power is removed.

8. CERTIFICATIONS AND COMPLIANCES:

CE Approved

EN 61326-1 Immunity to Industrial Locations

Emission CISPR 11 Class A

Safety requirements for electrical equipment for measurement, control, and

laboratory use:

EN 61010-1: General Requirements

EN 61010-2-030: Particular Requirements for Testing and Measuring

Circuits

RoHS Compliant

UL Recognized Component: File #E179259

UL Listed: File #E137808

Type 4X Indoor/Outdoor Enclosure rating (Face only)

IP65 Enclosure rating (Face only)

IP20 Enclosure rating (Rear of unit)

Refer to EMC Installation Guidelines section of the bulletin for additional

information.

9. ENVIRONMENTAL CONDITIONS:

Operating Temperature Range: 0 to 50°C (0 to 45°C with all three cards

installed)

Storage Temperature Range: -40 to 60°C

Operating and Storage Humidity: 0 to 85% max. relative humidity non-

condensing

Vibration to IEC 68-2-6: Operational 5 to 150 Hz, 2 g.

Shock to IEC 68-2-27: Operational 25 g (10 g relay).

Altitude: Up to 2000 meters

10. CONNECTIONS: High compression cage-clamp terminal block

Wire Strip Length: 0.3" (7.5 mm)

Wire Gage: 30-14 AWG copper wire

Torque: 4.5 inch-lbs (0.51 N-m) max.

11. CONSTRUCTION: This unit is rated for Type 4X/IP65 use. IP20 Touch

safe. Installation Category II, Pollution Degree 2. One piece bezel/case.

Flame resistant. Synthetic rubber keypad. Panel gasket and mounting clip

included.

12. WEIGHT: 10.1 oz. (286 g)

VIN > 2.4 VDC

VIN < 0.9 VDC

Inactive

VIN < 0.9 VDC

VIN > 2.4 VDC

Active

SINKING INPUTS

5.1 KΩ pull-up to +12 V

SOURCING INPUTS

5.1 KΩ pull-down

INPUT STATE

PAX-1/8 bảng dữ liệu(PDF) 3 Page - Red Lion Controls. Inc

PAX-1/8 bảng dữ liệu(HTML) 3 Page - Red Lion Controls. Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

bảng dữ liệu tải về

Link URL