A186

DF17 Seriesq0.5mm Pitch Board to Board Connector

100V DC

150V AC/1 minute

100mA

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

96 hours at temperature of 40ç and humidity of 90% to 95%

(-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles

50 cycles

Reflow: At the recommended temperature profile

Manual soldering: 350ç for 3 seconds

500M ohms min.

No flashover or insulation breakdown.

60m ohms max.

No electrical discontinuity of 1µs or more

Contact resistance: 60m ohms max. Insulation resistance: 250M ohms min.

Contact resistance: 60m ohms max. Insulation resistance: 500M ohms min.

Contact resistance: 60m ohms

No deformation of components affecting performance.

1. Insulation Resistance

2. Withstanding voltage

3. Contact Resistance

4. Vibration

5.

Humidity (Steady state)

6. Temperature Cycle

7. Durability (Mating/un-mating)

8. Resistance to

Soldering heat

Item

Specification

Condition

sProduct Specifications

Rating

Current rating

Voltage rating

0.3A

50V AC

Operating Temperature Range

Operating Humidity Range

Storage Temperature Range

Storage Humidity Range

-10 to 60ç(Note 2)

40 to 70%

-35 to 85ç (Note 1)

40 to 80%

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a

specific part number shown.

Note1: DF17(0.3)-*DS-0.5V : Contact area: gold plating/lead area: flash gold plated

DF17(4.0)-*DS-0.5V : Contact area: gold plating/lead area: tin plated

DF17(4.0)-*DP-0.5V : Contact area: gold plating/lead area: tin plated

Note2: The header gold plated product:Contact area: gold plating/lead area: tin plated

DF17(1.0H)-*DS-0.5V only: Contact area: gold plating/lead area: flash gold plated

sMaterial

Product

Part

Receptacle

Header

Insulator

Contact

Metal Fitting

Insulator

Contact

Metal Fitting

Polyamide

Phosphor copper

Phosphor copper

Polyamide

Phosphor copper

Phosphor copper

White

Gold plated (Note 1)

Tin-lead plated

White

Gold plated (Note 2)

Tin-lead plated

UL94V-0

---------------

---------------

UL94V-0

---------------

---------------

Material

Finish

Remarks

BOrdering Information

DF17 #

(**)

- * DS - 0.5 V (**)

1

2

3

4

5

6

8

7

qReceptacle/Header

Product height

The stacking height can be determined by adding the

figures in parentheses to receptacle and header.

Number of Contacts

20,26,30,40,50,60,70,80 contacts

Connector Type

DS: Receptacle

DP: Header

Contact Pitch: 0.5mm

Contact Type

V: Straight SMT

Packaging Type (57):Gold plated,embossed

tape packaging

3

4

5

6

7

8

2

1

DF17

DF17B

Fitting

K

K

Boss

K

∞

Series Name: DF17

Type

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.