2

2SIXT0112T2A0

www.power.com

Rev. A 12/24

Figure 2. Pin Configuration.

Pin Functional Description

1

2

20

19

X1

G2

E2

NTC

G1

E1/C2

C1

PIHPAE_0176

Connector X1

CNC TECH 3010-20-003-13-00 Eject Latch Header Assembly (or

similar) at X1; Connection from 2SIXT0112T2A0 to superior controller.

VCC (Pins 1, 3, 5, 7)

This pin is the primary-side 15 V supply voltage connection for the

primary-side electronic and the integrated DC/DC converter.

IN1 (Pin 11)

This pin is the command input for channel 1 (high-side switch).

SO1 (Pin 9)

This pin is the status output for channel 1 (high-side switch).

IN2 (Pin 15)

This pin is the command input for channel 2 (low-side switch).

SO2 (Pin 13)

This pin is the status output for channel 2 (low-side switch).

NC (Pin 17)

This pin is not connected.

TPM (Pin 19)

This is the measurement output for the NTC temperature sensing.

GND (Pins 2, 4, 6, 8, 10, 12, 14, 16, 18, 20)

These pins are the connection for the primary-side ground potential.

All primary-side signals refer to these pins.

Connections to Power Module

2SIXT0112T2A0 gate driver is are directly mounted to power modules

using screws.

G1

This is the screw connection to the gate of the high-side IGBT.

C1

This is the screw connection to the collector of the high-side IGBT.

E1/C2

This is the screw connection to the emitter of the high-side IGBT and

to the collector of the low-side IGBT.

G2

This is the screw connection to the gate of the low-side IGBT.

E2

This is the screw connection to the emitter of the low-side IGBT.

NTC

This is the screw connection to the NTC of the IGBT module.