1

FEATURES

APPLICATIONS

1

2

3

4

5

6

7

8

9

10

20

19

18

17

16

15

14

13

12

11

DGND

DIN

SCLK

FS

PRE

OUTE

OUTF

OUTG

OUTH

AGND

DVDD

DOUT

LDAC

MODE

REF

OUTD

OUTC

OUTB

OUTA

AVDD

DW OR PW PACKAGE

(TOP VIEW)

DESCRIPTION

TLV5630

TLV5631

TLV5632

www.ti.com .................................................................................................................................................... SLAS269F – MAY 2000 – REVISED NOVEMBER 2008

8-CHANNEL, 12-/10-/8-BIT, 2.7-V TO 5.5-V LOW POWER DIGITAL-TO-ANALOG

CONVERTERS WITH POWER DOWN AND INTERNAL REFERENCE

• Digital Servo Control Loops

• Eight Voltage Output DACs in One Package

• Digital Offset and Gain Adjustment

–

TLV5630 . . . 12-Bit

• Industrial Process Control

–

TLV5631 . . . 10-Bit

• Machine and Motion Control Devices

–

TLV5632 . . . 8-Bit

• Mass Storage Devices

–

1

µs in Fast Mode

–

3

µs in Slow Mode

• Programmable Settling Time vs Power

Consumption

–

1

µs in Fast Mode

–

3

µs in Slow Mode

–

18 mW in Slow Mode at 3 V

–

48 mW in Fast Mode at 3 V

• Compatible With TMS320 and SPI Serial Ports

• Monotonic Over Temperature

• Low Power Consumption:

–

18 mW in Slow Mode at 3 V

–

48 mW in Fast Mode at 3 V

• Power-Down Mode

• Internal Reference

• Data Output for Daisy-Chaining

The TLV5630, TLV5631, and TLV5632 are pin-compatible, eight-channel, 12-/10-/8-bit voltage output DACs

each with a flexible serial interface. The serial interface allows glueless interface to TMS320 and SPI, QSPI, and

Microwire serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits.

Additional features are a power-down mode, an LDAC input for simultaneous update of all eight DAC outputs,

and a data output which can be used to cascade multiple devices, and an internal programmable band-gap

reference.

The resistor string output voltage is buffered by a rail-to-rail output amplifier with a programmable settling time to

allow the designer to optimize speed vs power dissipation. The buffered, high-impedance reference input can be

connected to the supply voltage.

Implemented with a CMOS process, the DACs are designed for single-supply operation from 2.7 V to 5.5 V, and

can operate on two separate analog and digital power supplies. The devices are available in 20-pin SOIC and

TSSOP packages.

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright © 2000–2008, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.