12

12 - 215

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Evaluation PCB

The circuit board used in the final application

should use RF circuit design techniques. Signal

lines should have 50 Ohm impedance while the

package ground leads and exposed paddle should

be connected directly to the ground plane similar

to that shown. A sufficient number of VIA holes

should be used to connect the top and bottom

ground planes. The evaluation circuit board

shown is available from Hittite upon request.

Item

Description

J1 - J6

PCB Mount SMA RF Connector

U1

HMC340LP5 / HMC340LP5E Dual Mixer

107467 Evaluation Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

GaAs MMIC SMT DOUBLE-BALANCED

DUAL MIXER, 1.7 - 4.5 GHz

v01.0705