36mm Square 12V Digital RGB LED Pixels

(Strand of 20) - WS2801

PRODUCT ID: 683

RGB Pixels are digitally-controllable lights you can set to any color, or animate.

Each metal 'pixel square' contains 4 RGB LEDs and a controller chip soldered to

a PCB. The pixel is then 'flooded' with epoxy to make it water resistant, however

we cannot say 100% waterproof you may need to apply additional epoxy for

some applications/needs/use. These are fairly large pixels but they have a lot of

nice mounting options, such as two metal flanges on the side and a 0.15"/4mm

diameter hole in the middle so you can screw them directly onto a surface.

They're typically used to make outdoor signs. Compared to our other LED dots,

these are much bigger and much brighter, good for larger scale installations.

The pixels are connected by a 4-conductor cable. +12VDC, ground, data and

clock. Data is shifted down from one pixel to the next so that you can easily cut

the strand or attach more onto the end.