PIC16F1507-ESLASHSS. datasheet(217/278 Pages) MICROCHIP

217 / 278 page

 2011-2015 Microchip Technology Inc.

DS40001586D-page 217

PIC16(L)F1507

FIGURE 25-5:

CLOCK TIMING

TABLE 25-7:

CLOCK OSCILLATOR TIMING REQUIREMENTS

Standard Operating Conditions (unless otherwise stated)

Param.

No.

Sym.

Characteristic

Min.

Typ†

Max.

Units

Conditions

OS01

FOSC

External CLKIN Frequency(1)

—

0.5

MHz

External Clock (ECL)

—

MHz

External Clock (ECM)

—

MHz

External Clock (ECH)

OS02

TOSC

External CLKIN Period(1)

—



External Clock (EC)

OS03

TCY

Instruction Cycle Time(1)

200

TCY

TCY = 4/FOSC

These parameters are characterized but not tested.

†

Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not

tested.

Note

Instruction cycle period (TCY) equals four times the input oscillator time base period. All specified values are based on

characterization data for that particular oscillator type under standard operating conditions with the device executing code.

Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current con-

sumption. All devices are tested to operate at “min” values with an external clock applied to CLKIN pin. When an external

clock input is used, the “max” cycle time limit is “DC” (no clock) for all devices.

CLKIN

CLKOUT

OS02

OS03

(CLKOUT mode)

Note:

See Table 25-9.

OS11

OS12

PIC16F1507-E/SS. bảng dữ liệu(PDF) 217 Page - Microchip Technology

PIC16F1507-E/SS. bảng dữ liệu(HTML) 217 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL