công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

X24C08CS bảng dữ liệu(PDF) 3 Page - IC MICROSYSTEMS

tên linh kiện X24C08CS
Giải thích chi tiết về linh kiện  Serial E2PROM
PDF  16 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  ICMIC [IC MICROSYSTEMS]
Trang chủ  http://www.icmic.com
Logo ICMIC - IC MICROSYSTEMS

X24C08CS bảng dữ liệu(HTML) 3 Page - IC MICROSYSTEMS

  X24C08CS Datasheet HTML 1Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 2Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 3Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 4Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 5Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 6Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 7Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 8Page - IC MICROSYSTEMS X24C08CS Datasheet HTML 9Page - IC MICROSYSTEMS Next Button
Zoom Inzoom in Zoom Outzoom out
 3 / 16 page
background image
X24C08
3
DEVICE OPERATION
The X24C08 supports a bidirectional bus oriented pro-
tocol. The protocol defines any device that sends data
onto the bus as a transmitter, and the receiving device as
the receiver. The device controlling the transfer is a
master and the device being controlled is the slave. The
master will always initiate data transfers, and provide
the clock for both transmit and receive operations.
Therefore, the X24C08 will be considered a slave in all
applications.
Clock and Data Conventions
Data states on the SDA line can change only during SCL
LOW. SDA state changes during SCL HIGH are re-
served for indicating start and stop conditions. Refer to
Figures 1 and 2.
Start Condition
All commands are preceded by the start condition,
which is a HIGH to LOW transition of SDA when SCL is
HIGH. The X24C08 continuously monitors the SDA and SCL
lines for the start condition and will not respond to any
command until this condition has been met.
Stop Condition
All communications must be terminated by a stop condition
which is a LOW to HIGH transition of SDA when
SCL is HIGH. The stop condition is also used by the X24C08
to place the device into the standby power
mode after a read sequence. A stop condition can only be
issued after the transmitting device has released the
bus.
Figure 1. Data Validity
SCL
SDA
DATA STABLE
DATA
CHANGE
3842 FHD F06
Figure 2. Definition of Start and Stop
SCL
SDA
START BIT
STOP BIT
3842 FHD F07



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com