SC4 datasheet(21/44 Pages) TEKTRONIX

21 / 44 page

Three USB 2.0 ports on the front and two more USB 2.0 host ports on

the rear panel enable easy transfer of screen shots, instrument

settings, and waveform data to a USB mass storage device. A USB

mouse and keyboard can also be attached to USB host ports for

instrument control and data entry.

The rear panel USB Device port is useful for controlling the

oscilloscope remotely from a PC.

The standard 10/100/1000BASE-T Ethernet port on the rear of the

instrument enables easy connection to networks and provides LXI Core

2011 compatibility.

The HDMI port on the rear of the instrument lets you duplicate the

instrument display on an external monitor or projector with 1,920 x

1,080 resolution.

The I/O you need to connect the 4 Series MSO to the rest of your design environment.

Remote operation to improve collaboration

Want to collaborate with a design team on the other side of the world?

The embedded e*Scope

® capability enables fast control of the oscilloscope

over a network connection through a standard web browser. Simply enter

the IP address or network name of the oscilloscope and a web page will be

served to the browser. Control the oscilloscope remotely in the exact same

way that you do in-person.

The industry-standard TekVISA™ protocol interface is included for using

and enhancing Windows applications for data analysis and documentation.

IVI-COM instrument drivers are included to enable easy communication

with the oscilloscope using LAN or USBTMC connections from an external

PC.

e*Scope provides simple remote viewing and control using common web browsers.

Arbitrary/Function Generator (AFG)

The instrument contains an optional integrated arbitrary/function generator,

perfect for simulating sensor signals within a design or adding noise to

signals to perform margin testing. The integrated function generator

provides output of predefined waveforms up to 50 MHz for sine, square,

pulse, ramp/triangle, DC, noise, sin(x)/x (Sinc), Gaussian, Lorentz,

exponential rise/fall, Haversine and cardiac. The AFG can load waveform

records up to 128 k points in size from an internal file location or a USB

mass storage device.

The AFG feature is compatible with Tektronix' ArbExpress PC-based

waveform creation and editing software, making creation of complex

waveforms fast and easy.

Digital Voltmeter (DVM) and Trigger Frequency

Counter

The instrument contains an integrated 4-digit digital voltmeter (DVM) and 8-

digit trigger frequency counter. Any of the analog inputs can be a source for

the voltmeter, using the same probes that are already attached for general

oscilloscope usage. The trigger frequency counter provides a very precise

readout of the frequency of the trigger event on which you’re triggering.

Both the DVM and trigger frequency counter are available for free and are

activated when you register your product.

Enhanced security option

The optional 4-SEC enhanced security option enables password-protected

enabling/disabling of all instrument I/O ports and firmware upgrades. In

addition, option 4-SEC provides the highest level of security by ensuring

that internal memory never stores user settings or waveform data, in

compliance with National Industrial Security Program Operating Manual

(NISPOM) DoD 5220.22-M, Chapter 8 requirements and Defense Security

Service Manual for the Certification and Accreditation of Classified Systems

under the NISPOM. This ensures that you can confidently move the

instrument out of a secure area.

4 Series MSO

SC4 bảng dữ liệu(PDF) 21 Page - TEKTRONIX, INC.

SC4 bảng dữ liệu(HTML) 21 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

bảng dữ liệu tải về

Link URL