Page 1 of 5 

www.siliconsupplies.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Linear Voltage Regulator – 7809AC

Positive Fixed 9V Voltage Regulator in bare die form

±2% VOUT tolerance at 25°C

Greater than 1A output current capability

Internal thermal overload protection

Internal short-circuit current limit

Output capacitor not essential for stability

Full Military temperature range

Negative voltage complement is 7909AC

Rev 1.0

19/04/19

Features:

Ordering Information

The following part suffixes apply:

No suffix - MIL-STD-883 /2010B Visual Inspection

“H” - MIL-STD-883 /2010B Visual Inspection

+ MIL-PRF-38534 Class H LAT

“K” - MIL-STD-883 /2010A Visual Inspection (Space)

+ MIL-PRF-38534 Class K LAT

LAT = Lot Acceptance Test.

For further information on LAT process flows see below.

www.siliconsupplies.com\quality\bare-die-lot-qualification

Supply Formats:

Mechanical Specification

Default – Die in Waffle Pack (100 per tray capacity)

Sawn Wafer on Tape – On request

Unsawn Wafer – On request

Tape & Reel – On request

In Metal or Ceramic package – On request

The 7809AC 9V fixed 3-terminal positive voltage

regulator delivers up to 1.5A of output current with

adequate heat-sinking. The device is equipped with

internal limiting, safe-area compensation + thermal

shutdown features for overload immunity. The

7809AC can be used with external components to

obtain adjustable voltages or currents & can also be

used as the power-pass element in precision high-

current voltage regulators. No external components

are needed other than to enhance performance or

increase design flexibility.

Description

Die Dimensions in µm (mils)

1400 (55)

Die Size (Unsawn)

1400 x1900

55 x 75

µm

mils

Minimum Bond Pad Size

230 x 230

9.05 x 9.05

µm

mils

Die Thickness

280 (±20)

11.02 (±0.79)

µm

mils

Top Metal Composition

Al 1%Si 1.1µm

Back Metal Composition

Ti/Ni/Ag 1.2 µm

Replaced by 7809 REV 2