| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32F205RFT6 bảng dữ liệu(PDF) 86 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F205RFT6 bảng dữ liệu(HTML) 86 Page - STMicroelectronics |
|
86 / 184 page ![]() Electrical characteristics STM32F20xxx 86/184 DocID15818 Rev 15 On-chip peripheral current consumption The current consumption of the on-chip peripherals is given in Table 26. The MCU is placed under the following conditions: • At startup, all I/O pins are configured as analog inputs by firmware. • All peripherals are disabled unless otherwise mentioned • The given value is calculated by measuring the current consumption – with all peripherals clocked off – with one peripheral clocked on (with only the clock applied) • The code is running from Flash memory and the Flash memory access time is equal to 3 wait states at 120 MHz • Prefetch and Cache ON • When the peripherals are enabled, HCLK = 120MHz, fPCLK1 = fHCLK/4, and fPCLK2 = fHCLK/2 • The typical values are obtained for VDD = 3.3 V and TA= 25 °C, unless otherwise specified. Table 24. Typical and maximum current consumptions in Standby mode Symbol Parameter Conditions Typ Max(1) Unit TA = 25 °C TA = 85 °C TA = 105 °C VDD = 1.8 V VDD= 2.4 V VDD = 3.3 V VDD = 3.6 V IDD_STBY Supply current in Standby mode Backup SRAM ON, low-speed oscillator and RTC ON 3.0 3.4 4.0 15.1 25.8 µA Backup SRAM OFF, low- speed oscillator and RTC ON 2.4 2.7 3.3 12.4 20.5 Backup SRAM ON, RTC OFF 2.4 2.6 3.0 12.5 24.8 Backup SRAM OFF, RTC OFF 1.7 1.9 2.2 9.8 19.2 1. Guaranteed by characterization results, not tested in production. Table 25. Typical and maximum current consumptions in VBAT mode Symbol Parameter Conditions Typ Max(1) Unit TA = 25 °C TA = 85 °C TA = 105 °C VDD = 1.8 V VDD= 2.4 V VDD = 3.3 V VDD = 3.6 V IDD_VBAT Backup domain supply current Backup SRAM ON, low-speed oscillator and RTC ON 1.29 1.42 1.68 12 19 µA Backup SRAM OFF, low-speed oscillator and RTC ON 0.62 0.73 0.96 8 10 Backup SRAM ON, RTC OFF 0.79 0.81 0.86 9 16 Backup SRAM OFF, RTC OFF 0.10 0.10 0.10 5 7 1. Guaranteed by characterization results, not tested in production. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |