| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32H523CCU6 bảng dữ liệu(PDF) 119 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32H523CCU6 bảng dữ liệu(HTML) 119 Page - STMicroelectronics |
|
119 / 228 page ![]() DS14540 Rev 1 119/228 STM32H523xx Electrical characteristics 197 Note: An external resistor is not required between OSC32_IN and OSC32_OUT, and it is forbidden to add one. 5.3.8 Internal clock source characteristics The parameters given in Table 42 to Table 45 are derived from tests performed under ambient temperature and VDD supply voltage conditions summarized in Table 19. 48 MHz high-speed internal RC oscillator (HSI48) 64 MHz high-speed internal RC oscillator (HSI) Table 42. HSI48 oscillator characteristics Symbol Parameter Conditions Min Typ Max Unit fHSI48 HSI48 frequency VDD = 3.3 V, TJ= 30 °C 47.5(1) 48 48.5(1) MHz TRIM(3) User trimming step - - 0.175 0.250 % USER TRIM COVERAGE(2) User trimming coverage ±32 steps ±4.70 ±5.6 - DuCy(HSI48)(3) Duty cycle - 45 - 55 % ACCHSI48_REL(3) Accuracy of the HSI48 oscillator over temperature (reference is 30 °C) TJ = -40 to 130 °C -4.5 - 4 % ∆VDD(HSI48) HSI48 oscillator frequency drift with VDD (reference is 3.3 V) VDD = 3.0 to 3.6 V - 0.025 0.05 % VDD = 1.71 to 3.6 V - 0.05 0.1 tsu(HSI48)(3) HSI48 oscillator start-up time - - 2.1 4.0 μs IDD(HSI48)(3) HSI48 oscillator power consumption - - 350 400 μA NT jitter(3) Next transition jitter accumulated jitter on 28 cycles -- ±0.15 - ns PT jitter(3) Paired transition jitter accumulated jitter on 56 cycles(4) -- ±0.25 - 1. Calibrated during manufacturing tests. 2. Evaluated by characterization - Not tested in production. 3. Specified by design - Not tested in production. 4. Jitter measurements are performed without clock sources activated in parallel. Table 43. HSI oscillator characteristics(1) Symbol Parameter Conditions Min Typ Max Unit fHSI Frequency VDD = 3.3 V, TJ = 30 °C 63.7(2) 64.0(2) 64.3(2) MHz TRIM User trimming step Trimming is not a multiple of 32(3) - 0.24 0.32 % Trimming is 128, 256, and 384(3) -5.2 -1.8 - Trimming is 64, 192, 320, and 488(3) -1.4 -0.8 - Other trimmings are multiples of 32 (not including multiples of 64 and 128)(3) -0.6 -0.25 - DuCy(HSI) Duty cycle - 45 - 55 % |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |