SiI0680 Starter Kit

The starter kit includes hard-

ware, software and documenta-

tion to quickly bring ATA/133

and 48-bit sector-addressing

compliance to computer sys-

tems, motherboards, add-in

cards and embedded solutions.

Contents Include:

Hardware

• Reference design board

• Two ATA cables

Software

• Operating system drivers for

DOS, Windows 95/98, ME,

NT4, 2000 and XP

• Configuration utility

• Flash utility

- Base BIOS

- Medley RAID BIOS

• RAID operating system

drivers for Windows 98,

ME, NT4, 2000, and XP

Documentation

• SiI0680 install guide

• Medley ATA software RAID

users guide

• SiI0680 data sheet

General

• ATA/133

• 48-bit sector addressing

• Dual independent DMA channels with 256B

FIFO per channel

• Virtual DMA

• Read ahead

• Command buffering

• Supports temperature from 0°c to 70°c

• Supports external Flash

• Supports external BIOS

• 80-pin cable detect

Transfer Rates

• PIO-0, 1, 2, 3, 4

• MDMA Mode 0, 1, 2

• Ultra 33, 66, 100 and 133

• Supports bus master DMA at 133 MB/sec

burst rate

PCI Bus

• 32-bit, 33 MHz

• PCI 2.2 compliant

Power

• 3.3V Operating Voltage with 5V tolerant I/O

• ACPI: PCI Bus Power Management Spec 1.1

compliant

Package

• 144-pin, 20x20 mm LQFP (Low profile Quad

Flat Pack)

RAID (with Silicon Image's Medley™ ATA

software RAID)

• RAID 0 (Striping)

• RAID 1 (Mirroring)

• RAID 0+1 (Mirrored-Striping)

© 2006 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SteelVine, the SteelVine logo, SiI and SiI0680 are trademarks or registered trademarks of Silicon Image, Inc. in the United States

and other countries. Other trademarks are property of their respective holders. Product specifications are subject to change without notice.

Part Number: SiI0680CL144

SiI PB-12 rev2 8/06

Silicon Image, Inc.

1060 E. Arques Avenue

Sunnyvale, CA 94085

T 408.616.4000

F 408.830.9530

www.siliconimage.com

SiI0680 Circuit Diagram