POWERVERTER

24VDC TO 12VDC VOLTAGE CONVERTERS

24VDC TO 12VDC VOLTAGE CONVERTERS

These products offer a convenient way to operate mass produced 12Vdc equipment

such as cell phones, in car entertainment, professional communications, telematics

equipment, refrigerators, televisions etc. from the 24Vdc mobile electrical systems

found on diesel engined vehicles and vessels.

FAST INSTALLATION

All the units consume an off load current of less than 15mA, which is probably less

than the self discharge current of the vehicle’s battery. In most cases this can be

ignored, speeding the installation by removing the need to fit a remote switch.

All products fit onto a “Click ‘n’ Fit” mounting clip which is fixed in three points

allowing it to be mounted on uneven surfaces. It is easy to fit the clip into awkward

places and then simply click the unit into position.

A fixing kit for din rail installation is also available.

A green LED indicates when there is output from the converter. This gives

reassurance to the installation engineer and speeds fault finding.

PV50s, 50Amp converter

Galvanically isolated units are suitable for

marine applications and come complete

with the green tamperproof label for

petrochemical applications.

Many units in the PowerVerter range are also available as IP65 Versions. Please add the suffix -RU to the part number when ordering.

A COMPREHENSIVE

RANGE

There are 14 products in the range

from 3A to 50A in isolated or common

earth configurations. They have been

optimised for high volume 24Vdc to

12Vdc applications such as on heavy

goods vehicles, coaches, buses, forestry

and agricultural vehicles, as well as

commercial and leisure marine vehicles.

TAMPER PROOF

These units are IP53, so there are no

ventilation holes to permit stray objects,

dust or water droplets to enter the case,

there are no external fuses to be

tampered with. Fuses will only blow if

there is a fault so there is no need to

make them accessible.

PRODUCT VARIANTS

Many PowerVerters and DD Series

products can be configured with

alternative output voltages etc. for

specialist applications. Please call our

sales team to discuss your requirements.