| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PTH05010WAS bảng dữ liệu(PDF) 1 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
PTH05010WAS bảng dữ liệu(HTML) 1 Page - Texas Instruments |
|
1 / 19 page ![]() For technical support and more information, visit http://power.ti.com 15-A, 5-V Input Non-Isolated Wide-Output Adjust Power Module SLTS204C – MAY 2003 – REVISED DECEMBER 2003 Standard Application Features • Up to 15-A Output Current • 5-V Input Voltage • Wide-Output Voltage Adjust (0.8 V to 3.6 V) • Efficiencies up to 96 % • 160 W/in³ Power Density • On/Off Inhibit • Output Voltage Sense • Pre-Bias Startup • Margin Up/Down Controls Rset = Required to set the output voltage to a value higher than 0.8 V. (See spec. table for values) Cin = Required 470 µF capacitor Cout = Optional 330 µF capactitor • Auto-Track™ Sequencing • Under-Voltage Lockout • Output Over-Current Protection (Non-Latching, Auto-Reset) • Operating Temp: –40 to +85 °C • Safety Agency Approvals: UL 1950, CSA 22.2 950, EN60950 VDE (Pending) • Point-of-Load Alliance (POLA) Compatible PTH05010 (Top View) Margin Up Margin Down V IN L O A D C IN 470 µF (Required) C OUT 330 µF (Optional) Inhibit GND GND V OUT V o Sense Track 1 2 10 9 8 7 6 5 4 3 R SET (Required) 0.1 W, 1 % Description The PTH05010 series of non-isolated power modules are small in size but big on performance and flexibility. Their high output current, compact footprint, and industry-leading features offers system designers a versatile module for powering complex multi-processor digital systems. The series employs double-sided surface mount construction and provides high- performance step-down power conversion for up to 15 A of output current from a 5-V input bus voltage. The output volt- age of the PTH05010W can be set to any value over the range, 0.8 V to 3.6 V, using a single resistor. This series includes Auto-Track™. Auto-Track simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down. Other operating features include an on/off inhibit, output voltage adjust (trim), and margin up/down controls. To ensure tight load regulation, an output voltage sense is also provided. A non-latching over-current trip serves as load fault protection. Target applications include complex multi-voltage, multi-processor systems that incorporate the industry’s high-speed DSPs, micro-processors and bus drivers. Auto-Track™ Sequencing Pin Configuration Pin Function 1 GND 2Vin 3 Inhibit * 4Vo Adjust 5Vo Sense 6Vout 7 GND 8 Track 9 Margin Down * 10 Margin Up * * Denotes negative logic: Open = Normal operation Ground = Function active NOMINAL SIZE =1.37 in x 0.62 in (34,8 mm x 15,75 mm) PTH05010W —5-V Input |
Số phần tương tự - PTH05010WAS |
|
Mô tả tương tự - PTH05010WAS |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |