PCM1808-Q1

SLES265A – MARCH 2011 – REVISED AUGUST 2012

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range (unless otherwise noted)

(1)

PCM1808-Q1

Analog supply voltage, VCC

–0.3 V to 6.5 V

Digital supply voltage, VDD

–0.3 V to 4 V

Ground voltage differences, AGND, DGND

±0.1 V

Digital input voltage, LRCK, BCK, DOUT

–0.3 V to (VDD + 0.3 V) < 4 V

Digital input voltage, SCKI, MD0, MD1, FMT

–0.3 V to 6.5 V

Analog input voltage, VINL, VINR, VREF

–0.3 V to (VCC + 0.3 V) < 6.5 V

Input current (any pins except supplies)

±10 mA

Ambient temperature under bias, TA

–40°C to 125°C

Storage temperature, Tstg

–55°C to 150°C

Junction temperature, TJ

150°C

Lead temperature (soldering)

260°C, 5 s

Package temperature (reflow, peak)

260°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

Analog supply voltage, VCC

4.5

5

5.5

V

Digital supply voltage, VDD

2.7

3.3

3.6

V

Analog input voltage, full scale (–0 dB)

VCC = 5 V

2.93

3

3.23

Vp-p

Digital input logic family

TTL compatible

Digital input clock frequency, system clock

2.048

49.152

MHz

Digital input clock frequency, sampling clock

8

96

kHz

Digital output load capacitance

20

pF

Operating free-air temperature, TA

–40

125

°C

2

Copyright © 2011–2012, Texas Instruments Incorporated