SDP8105 datasheet(2/18 Pages) HONEYWELL

2 / 18 page

HOA1397

HOA1405

HOA2498

Package style

pc mount

pc/chassis mount

Coupled current

0.7 mA

0.8 mA

0.16 mA

Forward current

20 mA

30 mA

Optimum point of

response

1,27 mm [0.05 in]

5,08 mm [0.2 in]

12,7 mm [0.5 in]

Mounting

configuration

pcb mount

mounting tab

Termination style

0.020 in sq leads

0.018 dia leads

HLC1395

HOA0149

HOA1180

Package style

miniature

pc/chassis mount

chassis mount

Coupled current (Ic)

minimum

0.6 mA

1 mA

0.16 mA

Forward current

10 mA

40 mA

30 mA

Optimum point of

response

1,02 mm [0.04 in]

3,80 mm [0.15 in]

12,7 mm [0.5 in]

Mounting

configuration

pcb mount

pcb or 0.085 in dia mounting

hole

mounting tab

Termination style

0.020 in sq leads

28 AWG PVC insulated wire

leads

www.honeywell.com/sensing

Infrared Sensors Line Guide

Reflective

Sensors

Reflective

Sensors

Often reliable, cost-effective

performance.

Often ideal for object presence,

motion and limit sensing,

position encoding, movement

detection, and counting, the

Honeywell S&C infrared sensor

line consists of reflective and

transmissive sensors, detectors,

emitters, and encoders.

Reflective:

An infrared emitter

and phototransistors or

photodarlingtons are encased

side-by-side. Detector responds

to radiation from the infrared

emitter when a reflective object

passes.

Transmissive:

Through a field

of view, an infrared emitter and a

photosensor are mounted facing

each other when an opaque

object passes through the slot,

interrupting the infrared path,

it is detected. These metal or

plastic products offer a variety

of electro-optical characteristics

and package styles.

Detectors:

Available in a

number of different plastic,

metal, and ceramic packages,

with a wide variety of electro-

optical characteristics. Can

sense light over broad spectrum

from low visible through near

infrared wavelengths. Analog

detectors are available in

photodiodes, phototransistors,

and photodarlingtons. Digital

Optoschmitt detectors are also

available.

Emitters:

Available in a variety

of packages to compliment

the Honeywell detector family.

Available in transfer-molded

plastic packages, as well as

ceramic surface mount or metal

packages in various styles. Two

basic chip types are used: GaAs

and AlGaAs.

Encoders:

Sensing speed and

direction or mechanical

motion, these PC-mount, plastic

products are typically used in

conjunction with an encoder

disk or linear encoder strip. As

the interruptive pattern moves,

the sensor provides data for

processing.

SDP8105 bảng dữ liệu(PDF) 2 Page - Honeywell Solid State Electronics Center

SDP8105 bảng dữ liệu(HTML) 2 Page - Honeywell Solid State Electronics Center

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

bảng dữ liệu tải về

Link URL