| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LM5116-HT bảng dữ liệu(PDF) 4 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
LM5116-HT bảng dữ liệu(HTML) 4 Page - Texas Instruments |
|
4 / 36 page ![]() LM5116-HT SLVSBS8B – OCTOBER 2013 – REVISED JANUARY 2014 www.ti.com Absolute Maximum Ratings (1) VIN to GND -0.3 to 80 V VCC, VCCX, UVLO to GND (2) -0.3 to 16 V SW, CS to GND -3.0 to 80 V HB to SW -0.3 to 16 V HO to SW -0.3 to HB + 0.3 V VOUT to GND -0.3 to 80 V CSG to GND -1 to 1 V LO to GND -0.3 to VCC + 0.3 V SS to GND -0.3 to 7 V FB to GND -0.3 to 7 V DEMB to GND -0.3 to VCC V RT to GND -0.3 to 7 V EN to GND -0.3 to 80 V ESD Rating 2 kV HBM (3) Storage Temperature Range -55 to 190 °C Junction Temperature 190 °C (1) Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Operating Ratings are conditions under which operation of the device is guaranteed. Operating Ratings do not imply guaranteed performance limits. For guaranteed performance limits and associated test conditions, see the Electrical Characteristics tables. (2) These pins must not exceed VIN. (3) The human body model is a 100 pF capacitor discharged through a 1.5 k Ω resistor into each pin. 2 kV rating for all pins except VIN which is rated for 1.5 kV. THERMAL INFORMATION LM5116-HT THERMAL METRIC(1) JD UNITS 20 PINS θJA Junction-to-ambient thermal resistance(2) 43.2 θJCtop Junction-to-case (top) thermal resistance(3) N/A θJB Junction-to-board thermal resistance(4) 21.97 °C/W ψJT Junction-to-top characterization parameter(5) 12.95 ψJB Junction-to-board characterization parameter(6) 18.21 θJCbot Junction-to-case (bottom) thermal resistance(7) 5.25 (1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. (2) The junction-to-ambient thermal resistance under natural convection is obtained in a simulation on a JEDEC-standard, high-K board, as specified in JESD51-7, in an environment described in JESD51-2a. (3) The junction-to-case (top) thermal resistance is obtained by simulating a cold plate test on the package top. No specific JEDEC- standard test exists, but a close description can be found in the ANSI SEMI standard G30-88. (4) The junction-to-board thermal resistance is obtained by simulating in an environment with a ring cold plate fixture to control the PCB temperature, as described in JESD51-8. (5) The junction-to-top characterization parameter, ψJT, estimates the junction temperature of a device in a real system and is extracted from the simulation data for obtaining θJA, using a procedure described in JESD51-2a (sections 6 and 7). (6) The junction-to-board characterization parameter, ψJB, estimates the junction temperature of a device in a real system and is extracted from the simulation data for obtaining θJA , using a procedure described in JESD51-2a (sections 6 and 7). (7) The junction-to-case (bottom) thermal resistance is obtained by simulating a cold plate test on the exposed (power) pad. No specific JEDEC standard test exists, but a close description can be found in the ANSI SEMI standard G30-88. Spacer 4 Submit Documentation Feedback Copyright © 2013–2014, Texas Instruments Incorporated Product Folder Links: LM5116-HT |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |