www.ti.com

ABSOLUTE MAXIMUM RATINGS

LM2902-EP

SGLS335A – APRIL 2006 – REVISED APRIL 2006

over operating free-air temperature range (unless otherwise noted)(1)

LM2902-EP

LM2902KV-EP

UNIT

VCC

Supply voltage(2)

26

32

V

VID

Differential input voltage(3)

±26

±32

V

VI

Input voltage (either input)

–0.3 to 26

–0.3 to 32

V

Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,

Unlimited

Unlimited

VCC≤ 15 V(4)

D package (0 LFPM)

101

101

θ

JA

Package thermal impedance(5)(6)

°C/W

PW package

113

113

TJ

Operating virtual junction temperature

142

142

°C

Tstg

Storage temperature range(7)

–65 to 150

–65 to 150

°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential voltages and VCC specified for the measurement of IOS, are with respect to the network GND.

(3)

Differential voltages are at IN+ with respect to IN–.

(4)

Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

(5)

Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 142°C can affect reliability.

(6)

The package thermal impedance is calculated in accordance with JESD 51-7.

(7)

Long term high-temperature storage and/or extended use at maximum recommended operating conditions may result in reduction of

overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.

4

Submit Documentation Feedback