TQL9062

High Linearity Gain Block with Shutdown

Data Sheet, April 30, 2018 | Subject to change without notice

8 of 9

www.qorvo.com

®

Mechanical Information

Package Marking and Dimensions

Marking: Part number

– 9062

Lot code

– XXXX

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. Except where noted, this part outline conforms to JEDEC standard MO-220, Issue E (Variation VGGC) for thermally enhanced

plastic very thin fine pitch quad flat no lead package (QFN).

3. Dimension and tolerance formats conform to ASME Y14.4M-1994.

4. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.

PCB Mounting Pattern

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. Use 1 oz. copper minimum for top and bottom layer metal.

3. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend

a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10”).

4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.

9062

XXXX