www.sensata.com

Copyright © 2021 Sensata Technologies, Inc.

AGENCY APPROVALS AND CERTIFICATIONS

EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:

Designed in accordance with the requirements of IEC 62314

IEC 61000-4-2 : Electrostatic Discharge – Level 3

IEC 61000-4-4 : Electrically Fast Transients – Level 3

IEC 61000-4-5 : Electrical Surges – Level 3

IEC 60068-2-6 : Vibration 0.33mm and 0.75 mm Amplitude over 10-55 Hz

IEC 60068-2-27 : Shock Resistance 15g/11ms

E116949

LR81689

ACCESORIES

Part number: KS101

Clear plastic cover compatible with all new

S1 designs. Safety covers provide added

protection from electric shock when

installing or checking equipment.

Protective Cover

Hardware Kit

Part number: HK4

Bag with 2 square brass accessories and 2

screw 8-32 x 5/8 for output. Used to mount

TMR1 lug terminals.

New Accessories!

Protective Cover & Hardware Kits

Recommended Accessories

Cover

Hardware

Kit

Heat Sink

Part No.

Thermal Resistance

[ºC/W]

Lug Terminal Thermal Pad

KS101

HK1

HK4

HS501DR

HS301 / HS301DR

HS251

HS202 / HS202DR

HS201 / HS201DR

HS172

HS151 / HS151DR

HS122 / HS122DR

HS103 / HS103DR

HS101

HS073

HS072

HS053

HS033

HS023

5.0

3.0

2.5

2.0

2.0

1.7

1.5

1.2

1.0

1.0

0.7

0.7

0.5

0.36

0.25

TRM1

TRM6

HSP-1

HSP-2

GENERAL NOTES

(1) Single pair (up to 25A) Double pair* (up to 50A). *Caution: User must connect both pairs.

(2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50

Amps. For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.

(3) Output will self trigger between 450-600Vpk, Min. power factor 0.7 or higher, not suitable for capacitive loads.

(4) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only.

(5) All parameters at 25°C unless otherwise specified.

(6) For “S” option, operating voltage frequency is 47-63Hz.

(7) For parts with option “S” maximum leakage current is 10mA.

(8) Heat sinking required, see derating curves.

(9) Increase minimum voltage by 1V for operations from -20 to -40°C.

(10) Turn-on time for instantaneous turn-on versions is 0.02 msec (DC control Models).

(11)

All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).

(12) Load can be wired to either SSR output terminal 1 or 2.

(13) Elective Input Status LED, “G” option

(14) Elective Overvoltage Protection, “P” option.

(15) Elective Internal Snubber, “S” option.

(16)

Mechanical dimensions vary from G3 models.

For additional information or specific questions, contact Crydom Technical Support.

Page 6

(exept 110A & 125A models)