BMP585 datasheet(10/71 Pages) BOSCH

10 / 71 page

Bosch Sensortec

| BST-BMP585-DS003-02

10 | 71

Document number: BST-BMP585-DS003-02

as well as in the event of applications for industrial property rights

2 Specification

ALL OF THESE VALUES ARE TARGET VALUES.

If not stated otherwise,



All values are valid over the full voltage range



Minimum/maximum values are mean ±3 sigma values for the worst p/T setpoint



Typical values are the mean ±1 sigma values at the worst p/T setpoints



Typical values of currents and state machine timings are determined at 25 °C



Minimum/maximum values of currents are valid for the temperature range from -40…+85°C



Minimum/maximum values of timings are valid for the temperature range from -40…+85°C

Environmental conditions like temperature, RF and humidity are constant, unless ranges for these are specified.

Pressure performance is given in Table 1, temperature performance in Table 2. If not stated otherwise:



Performance parameters are valid for the range 30…110 kPa @ -5…+65 °C



Performance parameters are valid before soldering after storage in standard conditions according to Table 6.



Performance parameters are derived without preconditioning according to MSL3.



Performance parameters are measured in Bosch lab with dedicated pressure chamber and high-accuracy reference

equipment



„Post-solder“ refers to 3x reflow soldering after storage in standard conditions.



Environmental conditions, under which testing is performed, are divided in several ranges:

o Core Range: +15…+55°C, 70…110 kPa

o Extended Range: -5…+65°C, 30…110 kPa

o Operational Range: -40…+85°C, 30…110 kPa

o High pressure range: -40…+85°C, 110…125 kPa

BMP585 bảng dữ liệu(PDF) 10 Page - Bosch Sensortec GmbH