3003 datasheet(29/60 Pages) ABBATRON

29 / 60 page

Uninsulated Tip Jacks

•

Brass body with nickel plating.

•

Phosphorus bronze contact.

•

Mounts in a .250” hole in panels up to 0.375” thick, with nut

supplied.

•

Wire lead solders to lug on jack.

•

Rated at 15 Amps AC for 10oC temperature rise, continuous

duty.

Printed Circuit Test Jacks

•

Description: Double entry design, probe inserts at either end

of jack. Accepts probes no larger than .084”, contacts down

to .074”. Closed bottom construction keeps jack from fouling

with solder or flux. Locking ears hold jack firmly to board until

soldered. Precise dimensions allow automated assembly to

boards.

•

Body is molded nylon per MIL-P-20693.

•

Beryllium copper spring.

•

Mounts into .052” holes.

•

Data:

Insertion force: 30 oz. max.

Withdraw force: 8 oz. min with .080” probe.

•

Ratings: Operating voltage is 1500 volts, 60 CPS RMS

sea level. 350 volts, 60CPS RMS at 50,000 feet. 5 Amp AC

max. current rating.

•

Contact resistance: 20 Millivolt drop maximum at specified

current at 25oC.

•

Color: add color number as suffix to part number:

-101 White

-102 Red

-103 Black

-104 Green

-105 Blue -107 Yellow

•

This part is similar to MIL-C-39024/11A. Other contact

finishes are available as special order in quantity from the

factory.

PART

NO.

ILLUS. LENGTH FINISH

BOARD

THKNS.

325

0.130

Gold

1/16

321

0.219

Gold

1/8

430

0.203

Gold

3/19

www.abbatron.com

Contact our Sales Department at 1-888-847-6484

107

3003 bảng dữ liệu(PDF) 29 Page - Abbatron All Rights Reserved

3003 bảng dữ liệu(HTML) 29 Page - Abbatron All Rights Reserved

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

bảng dữ liệu tải về

Link URL