LTC6910 datasheet(13/16 Pages) AD

tên linh kiện	LTC6910

Giải thích chi tiết về linh kiện	±250V Input Range, 100kHz, G =10, Micropower, Difference Amplifier

PDF	16 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

13 / 16 page

LT1990-10

Rev 0

For more information www.analog.com

APPLICATIONS INFORMATION

–

LT1990-10

199010 F01

Figure 1. Optional CMRR Trim

in series with the other. The trim range of this configura-

tion is ±0.1% for the internal input resistor matching.

This technique using the LT1990-10 offers a much more

finely resolved correction than is available from ordinary

discretesolutions.Inapplicationswherethecommonmode

is relatively constant and large, this same configuration

can be treated as an offset adjustment.

Output Stability with Capacitive Loads

The LT1990-10 is internally compensated to drive high

capacitive loads of at least 2nF under all output load-

ing conditions when the output is in its linear region or

saturated to V–. However, a small oscillation may occur if

the output is saturated to V+ with capacitive loads greater

than 300pF at higher load currents and higher supply

voltages. A 10nF capacitor in series with a 600Ω resistor

placed between the output and ground will compensate

the amplifier for capacitive loads up to 10nF at all output

loading conditions. See the region of instability in the

Typical Performance Characteristics section.

LTC6910 bảng dữ liệu(PDF) 13 Page - Analog Devices