ACT001-10E Isolated Current Sensor

NVE Corporation

•

11409 Valley View Road, Eden Prairie, MN 55344-3617

•

(952) 829-9217

•

www.nve.com

Pinout

The ACT001-10E pinout is as follows:

Pin

Terminal

Description

1

V+

Supply Voltage

2

Out+

Positive Differential Bridge Output

3

I+

Current Terminal 1

4

I−

Current Terminal 2

5

Out−

Negative Differential Bridge Output

6

V−

Ground

Notes:

1.

Pins are numbered counterclockwise around the package.

2.

Current entering the chip via terminal I+ and leaving the chip via terminal I− produces a positive bridge output.

Available Parts

Part Number

Marking

Description

ACT001-10E

CTA

+/- 500 mA isolated current sensor

Package Drawing

Notes:

•

Dimensions in mm.

•

TDFN6 package has thermal power dissipation of 320°C/Watt in free air.

•

Attaching the package to a circuit board improves thermal performance, especially if the center pad is also soldered to the board.

•

The center pad may be left floating or connected to ground.

©NVE Corporation

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.