SP746

1 Form A

Solid State Relay

The SP746 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the

input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit

assures no false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V.

DESCRIPTION

FEATURES

APPLICATIONS

OPTIONS/SUFFIXES*

SCHEMATIC DIAGRAM

ABSOLUTE MAXIMUM RATINGS*

APPROVALS

Zero-Volt Cross Switching

•

High transient immunity

•

600V blocking voltage

•

1.2A maximum continuous current

•

High input-to-output isolation

•

Solid state reliability

•

Valve control

•

Solenoids

•

Home appliances

•

Metering equipment

•

Heating elements

•

High Input-to-Output Isolation

• -H

NOTE: Suffixes listed above are not included in marking on

device for part number identification.

PARAMETER

UNIT

MIN

TYP

MAX

Storage Temperature

°C

-55

120

Operating Temperature

°C

-40

85

Continuous Input Current

mA

40

Transient Input Current

mA

400

Reverse Input Control

Voltage

V

6

Output Power Dissipation

W

1.2

*The values indicated are absolute stress ratings. Functional operation of the

device is not implied at these or any conditions in excess of those defined in

electrical characteristics section of this document. Exposure to Absolute

Ratings may cause permanent damage to the device and may adversely

affect reliability.

UL / C-UL Approved, File #E90096

•

BABT Certificate #607837

•

www.ssousa.com • +1.408.293.4600

Page 1 of 5

SP746

rev 1.41 (10/23/2007)

© 2007 Solid State Optronics • San José, CA