SP541

1 Form A

Solid State Relay

The SP541 is a single-pole, single-throw, normally open multipurpose DC solid-state relay. It is designed to replace electromechanical

relays in critical applications that require fast switching, a high load current rating and solid state reliability. The relay consists of an

AlGaAs LED optically coupled to a Photo Diode Array, which drives an enhancement type DMOS transistor on the output.

DESCRIPTION

FEATURES

APPLICATIONS

OPTIONS/SUFFIXES*

SCHEMATIC DIAGRAM

ABSOLUTE MAXIMUM RATINGS*

APPROVALS

High Load Current (1.5A MAX)

•

Low input control power consumption (2.5mA TYP)

•

Low On-resistance (1 ohm MAX)

•

High input-to-output isolation

•

Long life/high reliability

•

Reed relay replacement

•

Meter reading systems

•

Medical equipment

•

Battery monitoring

•

Multiplexers

•

High Output Isolation

• -H

Tape and Reel

• -TR

NOTE: Suffixes listed above are not included in marking on

device for part number identification.

PARAMETER

UNIT

MIN

TYP

MAX

Storage Temperature

°C

-55

120

Operating Temperature

°C

-40

85

Continuous Input Current

mA

40

Transient Input Current

mA

400

Reverse Input Control

Voltage

V

6

Output Power Dissipation

W

1.2

*The values indicated are absolute stress ratings. Functional operation of the

device is not implied at these or any conditions in excess of those defined in

electrical characteristics section of this document. Exposure to Absolute

Ratings may cause permanent damage to the device and may adversely

affect reliability.

CSA CERTIFICATE #LR 111581-1

•

UL FILE #E90096

•

© 2004 Solid State Optronics • San José, CA

www.ssousa.com • +1.408.293.4600

Page 1 of 5

SP541

rev 1.40 (10/25/2004)