| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMP89FS60 bảng dữ liệu(PDF) 218 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP89FS60 bảng dữ liệu(HTML) 218 Page - Toshiba Semiconductor |
|
218 / 410 page ![]() Page 204 15. Real Time Clock (RTC) 15.3 Function TMP89FS60 RA000 Note 1: fs: Low-frequency clock [Hz] Note 2: RTCCR<RTCSEL> can be rewritten only when RTCCR<RTCRUN> is "0". If data is written into RTCCR<RTC- SEL> when RTCCR<RTCRUN> is "1", the existing data remains effective. RTCCR<RTCSEL> can be rewritten at the same time as enabling the real time clock, but it cannot be rewritten at the same time as disabling the real time clock. Note 3: If the real time clock is enabled and when 1) SYSCR2<XTEN> is cleared to "0" to stop the low-frequency clock oscillation circuit or 2) the operation is changed to the STOP mode or the SLEEP0 mode, the data in RTCCR<RTCSEL> is maintained and RTCCR<RTCRUN> is cleared to "0". 15.3 Function 15.3.1 Low Power Consumption Function Real time clock has the low power consumption registers (POFFCR2) that save power when the real time clock is not being used. Setting POFFCR2<RTCEN> to "0" disables the basic clock supply to real time clock to save power. Note that this renders the real time clock unusable. Setting POFFCR2<RTCEN> to "1" enables the basic clock sup- ply to real time clock and allows the real time clock to operate. After reset, POFFCR2<RTCEN> are initialized to "0", and this renders the real time clock unusable. When using the real time clock for the first time, be sure to set POFFCR2<RTCEN> to "1" in the initial setting of the program (before the real time clock control registers are operated). Do not change POFFCR2<RTCEN> to "0" during the real time clock operation. Otherwise real time clock may operate unexpectedly. 15.3.2 Enabling/disabling the real time clock operation Setting RTCCR<RTCRUN> to "1" enables the real time clock operation. Setting RTCCR<RTCRUN> to "0" disables the real time clock operation. RTCCR<RTCRUN> is cleared to "0" just after reset release. 15.3.3 Selecting the interrupt generation interval The interrupt generation interval can be selected at RTCCR<RTCSEL>. RTCCR<RTCSEL> can be rewritten only when RTCCR<RTCRUN> is "0". If data is written into RTCCR<RTCSEL> when RTCCR<RTCRUN> is "1", the existing data remains effective. RTCCR<RTCSEL> can be rewritten at the same time as enabling the real time clock operation, but it cannot be rewritten at the same time as disabling the real time clock operation. RTCSEL Selects the interrupt generation interval 000 : 215/fs (1.000 [s] @fs=32.768kHz) 001 : 214/fs (0.500 [s] @fs=32.768kHz) 010 : 213/fs (0.250 [s] @fs=32.768kHz) 011 : 212/fs (125.0 [ms] @fs=32.768kHz) 100 : 211/fs (62.50 [ms] @fs=32.768kHz) 101 : 210/fs (31.25 [ms] @fs=32.768kHz) 110 : 29/fs (15.62 [ms] @fs=32.768kHz) 111 : 28/fs (7.81 [ms] @fs=32.768kHz) RTCRUN Enables/disables the real time clock opera- tion 0 : Disable 1 : Enable |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |