The Embedded I/O Company

TPMC550

8/4 Channels of Isolated 12-Bit D/A

Application Information

The TPMC550 is a standard single-width 32 bit PMC

module and provides 8 channels of isolated 12 bit analog

outputs. 4 channel and rear-I/O order options are also

available. The settling time to 0.012% is 10µs maximum.

The TPMC550 supports immediate and simultaneous

load. The sequencer allows periodically update of enabled

channels and the sequence timer range extends from

100µs to 6.5s.

The programmable output voltage range is +/-10V or

0-10V selectable by jumper. An on board DC/DC

converter powers the isolated DAC and the output buffer.

Each TPMC550 is factory calibrated. The calibration

information is stored in the Identification-PROM unique to

each PMC module.

Software Support (TPMC550-SW-xx) is available for

different operating systems.

.

Technical Information

 Standard single-width 32 bit PMC module conforming

to IEEE P1386.1

 PCI 2.1 compliant interface

 3.3V and 5V PCI Signaling Voltage

 Board size: 149 mm x 74 mm

 8 or 4 channels of isolated 12 bit analog outputs

 Settling time to 0.012% is 10

µs maximum

 Full-scale output range +/- 10V or 0-10V

 Factory calibrated, calibration information stored in

EEPROM

 Operating temperature -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.1.1

2017-08-31

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com