TWINSPOT PROFESSIONAL

Twinspot Professional IP65 Emergency Luminaire

IK10 impact resistance

Emergency output of 2 x 285 lm

Soft-start charger to reduce building load

Selectable discharge rating for hazardous areas

Fast emergency switch-over (<0.5s) for high-task areas

Long life electronics

12 years design life at max. ambient

High Quality Lithium battery (LiFePO4) and smart charger

Standalone (SPU)

Self test (AS2293/ IEC62034)

DALI (IEC62386-202) DT1

Ektor wired monitored system

ORDERING INFORMATION

Order code

01708

Description

Ektor Twinspot emergency IP65

luminaire - PRO

Driver Type

DALI DT1 Emergency

Item Code

EV-TWINSPOT-WP-PRO

MECHANICAL

Adjustability

Adjustable

Body Material

Polycarbonate

Diffuser Material

Polycarbonate

Fitting Colour

White

IK Rating

IK10

Installation Type

Surface mount

IP Rating

IP65

ELECTRICAL

Electrical Rating

Class I

Input Current

0.1 A

Input Frequency

50 Hz

Input voltage

230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively

means that the voltage range of these products are 216Vac - 253Vac or 240V

+6%

Maximum Wattage

3 W

Standby Power

0.25 W

Standby power for non-maintained/switched maintained emergency devices is

measured when the light is off and the charger is in standby mode. For

maintained emergency devices, standby power is measured when the light is on

and the charger is in standby mode. Typically, charging occurs for the first 16

hours after the device is powered or after a battery discharge.

Working Temp Range

0 to 40 °C

DRIVER

Driver Included

Yes

Driver Type

DALI DT1 Emergency

Wiring Type

Re-wireable terminal block (6

pin)

EMERGENCY (EM SUFFIX)

Replacement Battery Code

01303

Emergency Control

DALI Monitored (DT1)

DALI Monitored ~ Supports Emergency test and monitoring over DALI

(IEC62386) with full compliance to IEC62386-202.

Emergency Duration

90 mins

Emergency Lumen Output

570 lm

Emergency Mode

Non-Maintained

Emergency Output Power

5500 mW

COMPLIANCE

Product Design Life

12 years

The product design life relates to the total product life which includes LEDs,

drivers and the enclosure. This is different to the LED lifetime which only refers

to the economical lifetime of the LEDs at which time the lumen output has

dropped below the L Value. The product design life is calculated at the

maximum ambient or working temperature of the product and takes into

account the Daily Use.

Standards

AS/NZS 60598.1

AS 60598.2.22

AS/NZS 61347.1

AS/NZS 61347.2.13

1300 438 658

sales@evolt.com.au

ektor.com.au

© 2025 Evolt