High Speed CMOS Logic – 54HC04

Hex Inverter Gate Logic IC in bare die form

Output Drive Capability: 10 LSTTL Loads

Low Input Current: 1µA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Die Size (Unsawn)

1300 x 1350

51 x 53

µm

mils

Minimum Bond Pad Size

106 x 106

4.17 x 4.17

µm

mils

Die Thickness

350 (±20)

13.78 (±0.79)

µm

mils

Top Metal Composition

Al 1%Si 1.1µm

Back Metal Composition

N/A – Bare Si

Outputs directly interface CMOS, NMOS and TTL

Operating Voltage Range: 2V to 6V

Function compatible with 54LS04

High Noise Immunity CMOS process

Full Military Temperature Range.

Rev 1.0

22/04/19

Description

Features:

The 54HC04 hex inverter gate is fabricated on a 2.5µm

CMOS process combining high speed LSTTL performance

with CMOS low power. The device contains six

independent inverters with standard push-pull outputs which

perform the Boolean function Y = Ᾱ in positive logic.

Internal circuitry comprises of three stages and includes

buffered output for high noise immunity and stability. Inputs

are compatible with standard CMOS outputs; with pull-up

resistors, they are compatible with LSTTL outputs. All

inputs are equipped with protection circuits against static

discharge and transient excess voltage.

Ordering Information

The following part suffixes apply:

No suffix - MIL-STD-883 /2010B Visual Inspection

“H” - MIL-STD-883 /2010B Visual Inspection

+ MIL-PRF-38534 Class H LAT

“K” - MIL-STD-883 /2010A Visual Inspection (Space)

+ MIL-PRF-38534 Class K LAT

Die Dimensions in µm (mils)

1300 (51)

LAT = Lot Acceptance Test.

For further information on LAT process flows see below.

www.siliconsupplies.com\quality\bare-die-lot-qualification

Supply Formats:

Mechanical Specification

 

 

 

 

 

 

Default – Die in Waffle Pack (400 per tray capacity)

Sawn Wafer on Tape – On request

Unsawn Wafer – On request

Die Thickness <> 350µm(14 Mils) – On request

Assembled into Ceramic Package – On request

Page 1 of 5 

www.siliconsupplies.com